2 Bucket Kit, Grit Guards & Lids (15L)
$60.00
Skip to product information
2 Bucket Kit, Grit Guards & Lids (15L)
$60.00
Pickup available at Oxley HQ
Usually ready in 4 hours
- Two buckets is the single biggest change you can make to stop swirling your own paint
- The grit you pull off the car ends up in the rinse bucket instead of back on the panel
- Grit guards and lids included with both, so they stack and store full
- 15 litres each, Australian made, heavy enough for a wet garage floor
$9 flatParcel Post anywhere in Australia, free over $150.
Same dayOrder before 11am on a weekday and it ships that day.
Two 15 litre buckets, one for your wash solution and one for rinsing the pad. Running two instead of one is what stops you putting the grit straight back on the car, because it ends up in the rinse bucket rather than going back onto the panel.
Australian made. Both come with a grit guard and a lid.
What is in it
- 1 x Wash Bucket: 15 litre, grit guard, lid
- 1 x Rinse Bucket: 15 litre, grit guard, lid
How the two bucket method works
- Wash bucket gets your WASH solution. Rinse bucket gets plain water. Grit guard in the bottom of both.
- Load the wash pad from the wash bucket and do a panel, top down, in straight passes.
- Before you go back for more solution, rinse the pad in the rinse bucket and rub it across the grit guard. That is the step that actually releases the dirt.
- Repeat. By the end the wash bucket is still clean and the rinse bucket is filthy, which is how you know it worked.
Good to know
- Lids and grit guards interchange across all three of our 15 litre buckets, including the Wheel Bucket.
- The lids mean you can stack them, store them, and carry them without slopping water through the garage.
- Wheels are far dirtier than the rest of the car. Keep a third bucket for those instead of running brake dust through your wash water.
- The longer version, with dilution ratios and the order of work, is in The Two Bucket Wash Method, Done Properly.