Snow Foam Kit, Lance & 1L Foam

The lance and the foam together, which is the pairing you actually need to pre-wash a car. The foam goes on thick, sits for up to ten minutes and softens the grit so it rinses away instead of being dragged across your paint by a wash pad. Dragging grit is what puts swirls into paint, so the less of it left on the car, the better.

Priced below buying the lance and the litre of SNOW separately. Choose your pressure washer fitting above.

What is in it

• 1 x Snow Foam Lance: 1 litre bottle, adjustable valve, in the fitting you choose
• 1 x SNOW pH Neutral Snow Foam 1L: citrus infused, safe over wax, sealant and ceramic coatings

How to use it

1. Work in the shade. Never foam a car in direct sun or on hot panels.
2. Rinse the car down first.
3. Fill the lance bottle with SNOW. The lance mixes it with the water as it sprays.
4. Set the thickness on the valve, then lay an even coat over the whole car.
5. Leave it up to ten minutes. Do not let it dry.
6. Rinse it off, then do a normal two bucket wash. A pre-wash is not a wash.

Good to know

• Not sure which fitting you have? Pull the lance off your pressure washer and look at the end that plugs into the gun. Send us a photo before you order if you are still unsure.
• Thicker foam is not better foam. Enough to coat and cling is enough.
• Rinse the bottle out after use so the filter and nozzle stay clear.
• Refills come in 1 litre and 5 litre. The 5 litre is a lot cheaper per litre.
• Foam thinner than you expected on the first go? Why Your Snow Foam Isn't Thick covers flow rate, dilution and dwell time.